Видео

You ever got a p065b code after getting new PCM or memory problems

Awesome I went out and bought the fuel line removal tool right after seeing this

Was the place you got it from (WholeSale Parts Express) out of Fort Lauderdale Florida.

Can’t see fuck all

I'd recommend trying the starter before putting everything back together. I replaced one that wouldn't disengage had to swap out for one that worked.

how would you know how much refrigerant to put in there if you don't know what's in the system presently? to properly do this job, it requires a machine that will pump out all the refrigerant and then put in what's in the spec for a particular vehicle

Thanks man!

Hey man thanks for the video but quick question. My 2003 Ford F-150 Air Conditioning works but it doesn’t give out cold air though, only warm. Is there anyway that I could maybe fix it?

Hey thx a lot Sir! Switched mine out thx to your easy video to follow! God Bless!👍🙏

I honestly didn't know that caliper pisten screwed in and out. I've always had and worked on cars that were just straight in and out. I popped the brake reservoir lid off and just used a flat screw driver to screw it back in. Went smooth. Thank you.

Is it Better sintetic blend or full sintetic?

I can do the work, just could not make the videos. I'd have to edit out too many old Anglo-Saxon words!

Should have cut the line short then use a socket

Awww Glove? Cute

How much was it at Honda?

what kind of epoxy did you use?

Just had this happen on my 5th wheel trailer. com Turns out myGMC has a 20 amp fuse in the main fuse box under the hood. I changed the fuse and now have marker lights again

Just did the same job on my 08 f150. However, the rotor/hub assembly would not turn very freely after being torqued down. The passenger side rotated perfectly free as yours did in the video. Any ideas why my driver side will barely spin once the axle nut is torqued to 300ft lbs? Both sides were tested without brakes installed. I did use a torque wrench. Not an impact.

Thanks for this...I have replaced tons of brake pads, but it has been over 10 years ago now, so it was nice to get a quick refresher without having to waste time on a 30-minute video.

Mines is burnt out on drivers side too

Three different bolt sizes??? Uhhhhggg fooooorrrrrrrddddd!!! Whyyyy!!?

Practically no one bothers with removing the little drain plug on the oil filter housing. I never do. If it ain't leaking, its fine. Just go straight to removing the entire housing. Save time.

My cpu is telling me to check gauges so would thr pcm be an issue?

My passenger side brake light was not working. I sprayed contact cleaner on the rv plug and truck connector. That did the trick. Thanks!

Thanks

I got mine done and have a tip to share for getting the bottom cover back into the steering wheel assembly. Looking at the top of the flange that needs to be inserted, notice the excess of flange beyond the hooks at the top. Leaving the hooks, cut off the excess following a line that will leave only half of the flange at the bottom. It will then snap into place easily without compromising the integrity of the piece.

The engine cover bolts are different on the front and back do you happen to know which ones went which way?

嗨，我是来自Roadanvi的Astra，我们是一个专门从事汽车音响，信息娱乐系统和相关配件的品牌。 因为我们知道您的电子邮件每天都会收到很多电子邮件，但我不想失去与您合作的机会，所以我尝试在这里与您联系。 我想知道您是否对凯美瑞的新主机感兴趣？或者，如果您有其他车型，请告诉我，只要我们有适合您原车的收音机即可。 如果您能在您的 RUclips 频道上制作评论视频，我们将非常高兴，如果您有兴趣，希望您能回复并请将您的地址发送给我们以运送包裹。

Awesome TY‼️

I drove a 1997 ford f150 4×4 stepside with a 4.6 engine for 475k. Regular maintenance and motorcraft semi synthetic oil every 5k mile. Tranny started to shudder and blew a head gasket after 15 years of driving out of state to work.

Great job! You do better with one hand while shooting video than I'll be able to do with my 76 year-old mitts, but you've convinced me I should be able to get the job done without pulling the steering wheel. I really didn't want to mess with that.

Thanks for the video, my light was on, and when I give it gas my Air conditioner would stop blowing. Many thanks for your video. I will have to con my son into fixing it for me.😂

It's $280 if I ask our local small engine mechanic to fix it. Now you have restored my faith in myself!

Every year Thomas has to teach me again how to do it with the correct tools. Thanks!

Really good job explaining thank you

Great. Love youtube

For those people wondering why they keep replacing their alternators it’s bcuz of the amount of oil leaking into the alternator I had the same problem

Thank you for this video! My alternator has that same grease caked all over it. Did you find out what leak caused it on yours?

I’m getting uneven vent air conditioning temperatures. The passenger side seems to be fine. But the drivers side is blowing warm air. My drivers side actuator goes up smooth and effortless for heat however for the ac it goes down far enough for the air to blow but hesitates and stops. Does that indicate that it’s stuck and the actuator is bad???

Gonna try this and I'll come back to let ya know if it worked 😅

I have a 12' PJ utility trailer that on drivers side the front running light on trl. and the running light on its front fender do not light up with two different vehicles. All the other running lights work on that side and other side including rear lights function. Do I have a ground problem or wire problem? Any advice?

Very useful, thanks

Great video. One of my turn signals is blinking really fast. Is it likely to be the connector?

Could you use a floor jack to pry the swaybar up? Have a 2001 F150 I got from my dad when he passed a couple years ago and the linkages need to be replaced.

All my lights work except for left break light I’m stumped

I just changed mine on a 2008 f150 4.6 liter i did not need the tool for the fuel line it had a clip on each end that holds it in place

I love you

Perfect, how to video thank you brother. I just finished mine with your help.

Yes I have

good video - noticed my bow light was not working last night - pulled it apart and the cap on end of bulb was separated - ordered some replacement LED off of amazon